Cosmetic Powered Belt Conveyor Machine for Automated Production
line
Introduction
Sidewall belt conveyor (also called large dip corrugated belt
conveyor) with a large inclination (90 degrees vertical) transport.
So that it is ideal equipment for achieving large angle conveying.
Widely adopted in underground mining projects, open pit mining,
large dump trucks and other parties.
Product Decription
Cosmetic Powered Belt Conveyor Machine for Automated Production
line is a new type of continuous conveying equipment, which has a large
conveying capacity (1.5 to 2 times higher conveying capacity than
other conveyors); strong versatility (basic parts are the same with
those of universal belt type), wide range of application (suitable
for conveying gravel, limestone, coal, sand, clay, sintering sand
powder, wood chips, grain, etc.. which with a block size of not
more than 550mm.)
1. The large inclination belt conveyor can also set horizontal
conveying sections of any length at unit head and unit tail for
connection with other conveying equipment.
2. Cosmetic Powered Belt Conveyor Machine for Automated Production
line is a general-purpose continuous conveying material for bulk
materials, which adopts the conveyor with corrugated sidewall and
diaphragm. So it is especially suitable for large inclination
conveying.
3. It can be used in industries such as coal, chemical, building
materials, metallurgy, electric power, light industry, grain, port,
etc.. And convey various bulk material with bulk specific weight of
0.5-2.5t/m3 within the scope of -15 °C ~ +40 °C of working
environment humidity.
4. The conveying angle of belt conveyor with sidewall is 0°~90°.
Application
The belt conveyor is widely used in food, chemical, medicine, daily
necessities, toys, household appliances, electrical appliances,
building materials and other industries, it is the hub of
automation technology.
Advantages
1. Belt material: PVC, chain etc(Customized ones available)
2. Layer board: 1.5t galvanized sheet
3. Speed Adjustable Range: Adjust available
4. Operate Height: Adjust available
5. Frame Meterial: Iron, Stainless Steel etc(Customized ones
available)
6. Under Carriage Material: Carbon Steel, stainless steel
etc(Customized ones available)
Features
Cosmetic Powered Belt Conveyor Machine for Automated Production
line has following features:
1. When conveying materials vertically, the material size can be up
to 400mm.
2. Smooth transition from horizontal to oblique (or vertical).
3. It can convey bulk materials with large angle, which can save a
lot of equipment floor space and completely solve the conveying
angle that ordinary belt conveyor can't reach.
4. The mechanized belt conveyor conveys materials and the overall
investment cost is low, saving about 20% to 30% of investment
costs.
5. Compared with ordinary belt conveyors, bucket elevators and
scraper conveyors, this machine has superior comprehensive
technical performance.
6. The conveying capacity is large, up to 6000m3/h, and the
vertical lifting height can reach 500m.
7. The tape has high strength and long service life.
8. Low energy consumption, simple structure and convenient
maintenance.
Working Principle
Cosmetic Powered Belt Conveyor Machine for Automated Production
line is constructed by attaching a freely stretchable rubber wave
vertical "skirt" on both sides of the flat rubber conveyor belt,
and there is a certain strength adhesion between the skirts, which
and elasticity of the diaphragm form a squat bucket for the
material is continuously conveyed in the bucket. DJ large
inclination belt conveyor (sidewall belt conveyor) can be widely
used in coal, grain, building materials, chemical, hydropower and
metallurgy departments, and convey various bulk material with bulk
specific weight of 0.5-2.5t/m3 within the scope of -15 °C ~ +40 °C
of working environment humidity.
For materials with special requirements, such as high temperature,
materials with acid, alkaline, oil or organic solvents, special
sidewall conveyor belts are required.
Specification
| Belt width B(mm) | 400 | 500 | 650 | 800 |
| Height of sidewall (mm) | 60 | 80 | 80 | 120 | 120 | 160 | 120 | 160 | 200 | 240 |
Capacity of partial angle Q3/h | 30° | 20 | 34 | 46 | 71 | 104 | 120 | 128 | 157 | 195 | 235 |
| 45° | 14 | 26 | 35 | 57 | 83 | 97 | 102 | 127 | 157 | 195 |
| 60° | 10 | 18 | 25 | 40 | 58 | 69 | 72 | 90 | 112 | 142 |
| 90° | 5 | 10 | 13
| 21 | 31 | 37 | 38 | 48 | 60 | 76 |
External dimensions | Center height of head wheel H2/h(MM) |
350-100 |
1100-2000 |
1300-2000 |
1300-2000 |
Center height of tail wheel H2/h(MM) |
330-490 |
600 |
600 |
600-800 |
Height of belt surface H2/h(MM) |
500-700 |
760-800 |
800-850 |
800-1115 |
Width of foot margin B2/h(MM) |
580 |
870 |
1020 |
1220 |
| Belt width B(mm) | 1000 | 1200 |
| Height of sidewall (mm) | 120 | 160 | | 200 | 240 | 160 | 200 | | 240 | 300 |
Capacity of partial angle Q3/h | 30° | 172 | 216 | | 267 | 327 | 275 | 331 | | 419 | 466 |
| 45° | 137 | 175 | | 216 | 271 | 222 | 267 | | 347 | 384 |
| 60° | 96 | 124 | | 153 | 197 | 158 | 190 | | 253 | 178 |
| 90° | 51 | 66 | | 83 | 106 | 85 | 102 | | 136 | 149 |
External dimensions | Center height of head wheel H2/h(MM) |
1400-2000 |
1600-2000 |
Center height of tail wheel H2/h(MM) |
600-800 |
800-1000 |
Height of belt surface H2/h(MM) |
800-1200 |
1050-1500 |
Width of foot margin B2/h(MM) |
1440 |
1690 |
